DigytaliaDishwashers are one of the twentieth century’s greatest gifts to homeowners everywhere, but they are not without their issues. To learn a little more about some common New York dishwasher problems, read on:
Water Pressure – If your dishes are coming out of a dry cycle with pieces of food still attached, then there’s a strong possibility that the water pressure in the machine is too low. Usually, this is caused by a problem with the water intake valve, although there may be other culprits.
Soap – Dishwasher detergent is specially formulated so that it creates as few suds as possible. These types of soap are used to prevent your dishwasher from bursting with bubbles. If your kitchen is awash with bubbles, then make sure you are using the correct type of soap.
Even dishwasher-specific detergents can cause problems. If your dishwasher isn’t draining completely, then it could be because your dishwasher detergent is too foamy. The sensors in the dishwasher aren’t sensitive enough to pick up the suds, so they tell your machine to end the cycle before flushing out the bubbles, which is why you’ll find standing water in the bottom of the machine when you open it. If this is the problem, then change detergent brands or use less detergent per cycle.
Clogs – A number of common dishwasher problems are caused by clogs. If you’ve switched dishwasher detergents, but the machine still won’t drain correctly, then the problem is most likely a clog, usually in the drain hose. Dishes that stay dirty no matter how many times you run them through the dishwasher could be the product of blocked water jets. This is a fairly typical issue in areas that have “hard water:” The minerals in the tap water gradually accumulate in the water jets and eventually cause a blockage.
If you’re having trouble with your dishwasher, then you should consult with appliance repair New York company, such as the Renah Appliance Repair.
